Siemens Sinumerik 840C Diagnostics Manual page 176

1 Alarms
1.5.1 Alarm description
165005 Error in data transfer
Scan
Loading drive standard data
Effect
Some data in the drive are invalid
Explanation
Data not completely transferred
Remedy
Repeat operation
165007 Data is stored with errors
Scan
Saving machine data
Effect
An invalid file was stored
Explanation
Data was not completely transferred
Remedy
Delete file, repeat operation
165008 Selected drive has no FDD module
Scan
Drive MD: select motor
Effect
Function is not executed
Explanation
No active FDD drive available
Remedy
Enter FDD in drive configuration and accept
165009 No valid slot selected
Scan
Drive configuration: select module or delete slot
Effect
Function is not executed
Explanation
No valid slot number was entered
Remedy
Enter valid number (1–15), repeat operation
165010 Drive not active
Scan
Saving or loading MD of an individual drive
Effect
Function is not executed
Explanation
There is no connection to the passive drives
Remedy
Switch drive to active, accept configuration
165011 Transmission error – data not transferred
Scan
Saving, loading machine data
Effect
Function is not executed
Explanation
Transmission not possible or transmission interference
Remedy
Repeat operation
165012 There is no file with FDD motors
Scan
Drive MD/FDD/motor selection
Effect
No default possible for motor
Explanation
There is no system file
Remedy
Please notify Siemens Service
Note
Applies as from SW 4
1–168

Siemens AG 2001 All rights reserved 6FC5198–jAB40
SINUMERIK 840C / SIMODRIVE 611–D (DA)
04/96
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey
OK softkey