Table of Contents
Advertisement
Connecting Hardware Devices
3
Check the battery position and push the eject lever in the direction of the arrow until
you can remove the battery.
Removing the battery
4
Install the new battery with the positive (+) electrode facing up.
Installing the battery
5
Reinstall any expansion cards you removed. For instructions, see
expansion cards
6
Reinstall the access panel, reconnect all signal and power cables, then turn on the
server. For instructions, read steps 7 through 9 in
53.
7
Set up the server according to the system configuration information that you wrote
down in advance.
Eject lever
on page 91.
Internal battery
Installing
Maintenance overview
75
on page
Advertisement
Table of Contents
