Table of Contents
Advertisement
Hardware Diagnostics
Before running the test, you must set the parameters.
CHAN
HOST
ID00, 01, 02 ...
NOTE: If "HOST ID NUMBER" is set as "ALL" then "SCSI ID NUMBER" and
"CHANNEL NUMBER" are ignored and the result codes are displayed for all
channels.
10. CD-ROM TEST checks the computer's CD-ROM functions
Insert the SST CD-ROM for this test.
- 01. Sequential Address Read subtest is a sequential reading of one block unit of all
the logical addresses.
- 02. Random Address Read subtest reads data at random addresses.
For the ERROR NAME and STS error log information, refer to Log Utilities for the SCSI
HDD TEST.
For DETAILS error log information, see below:
(DETAILS = XXXXXXXXXXXXXX) AAA BB CC DD EE FF GG
AAA
BB
Parameter
15
Case of IDE CD-ROM device
Sense data (0 byte)
HW Diagnostics Program Main Menu
Indicates the ASPI angle ID and host adapter
Indicates the channel number in the target host
adapter
Indicates the SCSI ID number in the target host
adapter.
PrM (Primary, Master)
PrS (Primary, Slave)
ScM (Secondary, Master)
ScS (Secondary, Slave)
Meaning
128
Advertisement
Table of Contents
