Table of Contents
Advertisement
Management Software
Before Installing Harness Eye/web
This section describes the HarnessEye/web installation procedure. Keep the following
points in mind:
RAID configuration information is available only if the RAID controller card, driver and
SNMP agent software are installed, properly configured and running on the server at
the time of HEW Agent installation. For the installation procedures, refer to the
respective manuals.
To install SNMP, follow the procedures specific to each OS. For details, refer to the
applicable OS manual.
To enable an Agent to output SNMP traps or display Agent information on the
Management Console, the SNMP properties must be properly set up prior to the
installation of the Agent.
Before Installing the Management Proxy
SNMP Settings
1
Install the SNMP Service on the Magnia Server selected to function as a
Management Proxy.
2
Open the SNMP Service Properties dialog box.
3
Click the Security tab.
SNMP Service Properties - Service tab
4
Select the Send authentication trap checkbox.
Before Installing Harness Eye/web
179
Advertisement
Table of Contents
