Table of Contents
Advertisement
Getting Started
BIOS setup
The server's system setup can be changed using the BIOS setup Utility. You can make
changes to the BIOS setup even if an operating system has not been installed on the
server. The system settings you enter are written in the CMOS and flash memory and
take effect when you restart the server. BIOS settings are used for reference during the
POST.
If the server hardware doesn't support the values you enter, an appropriate error
message appears on the screen when the POST routine completes. If this occurs,
change the setting using the BIOS Setup Utility.
Backup diskettes
The Toshiba Server Setup Tool (SST) contains software that allows you to make backup
diskettes of the drivers, utilities, and data stored on the server. Make as many backup
diskettes as necessary to record the configuration of the server. Store the backup
diskettes in a safe place.
Creating backup diskettes
If the server is powered on, following the directions below to create backup diskettes. If
the server is not powered on see
1
Insert the Toshiba Server Setup Tool CD into the CD-ROM drive.
2
Start the Toshiba Server Setup Tool.
3
Click Utilities.
4
Click Create Floppy Disks.
5
Select the name of the diskette you want to make, then click OK.
6
Insert a blank 1.44 MB formatted diskette in the drive, and then click OK.
HINT: Some of the disks you create must be bootable. The Toshiba SST will display
messages that guide you through creating a bootable disk.
For more information on making a backup diskette, refer to the Toshiba Magnia 3200
Server Setup Tool Manual provided on the Toshiba Server Setup Tool CD that came with
the server.
Starting SST
on page 135 for more information.
47
BIOS setup
Advertisement
Table of Contents
