Table of Contents
Advertisement
Management Software
S.E.L. (System Event Log) display
Displays the data logged in motherboard memory, including hardware error information.
Automatic server restart
Automatically reboots the server if the Agent is locked for a specified duration.
Remote power control
Turns the power on or off to the Agent machine from the Management Console.
Error report
If an error occurs, error information can be reported to the Management Console. There
are two ways to send a report to the Management Console:
Display an Alert Message on the Management Console
Send an e-mail to a designated component
Five error levels are specified:
Information
Warning
Error
Success Audit
Failure Audit.
Events written to the Agent event log are reported to the Management Proxy. These
events can be filtered as desired.
Error information reported to the Management Proxy can be filtered and forwarded to the
Management Console or to a designated e-mail address.
Front panel indicators
Enables you to type a specified character string via the Management Console to change
the information displayed on the front panel display.
Performance display
Displays CPU and memory use rates. If threshold values are set, events will be written
to the Agent event log when either rate exceeds the specified threshold.
Trap transmitting to a Compaq Insight Manager
If a server error occurs, it is possible to transmit a SNMP trap. A SNMP trap is
transmitted when a temperature, FAN, or voltage error occurs. In order to confirm this
function, it is necessary to specify it using the Local Configuration Tool.
175
HEW modules
Advertisement
Table of Contents
