Fujitsu ETERNUS DX60 S3 User Manual page 663

Chapter 7 Advanced Copy Management
7.9 ODX Management
• Monitoring the usage of an ODX Buffer volume is available. If insufficient capacity is detected, the
ETERNUS DX sends a notification. Refer to
ODX Buffer volume capacity is frequently insufficient, the benefit of using the ODX function is lost.
Expand the ODX Buffer volume capacity as required. Refer to
RAID Migration" (page
• An ODX Buffer volume can be deleted by using the same procedure as "Standard" and "TPV" type volumes
if the ODX function is not used. Refer to
type ODX Buffer volume, use ETERNUS CLI.
• The volume capacity that is required for an ODX Buffer volume varies depending on the server system
configuration and the applications that are being used. When using the ODX function for normal file
copying or file migration with Microsoft Windows Server, creating a 10GB ODX Buffer volume is
recommended.
• An ODX Buffer volume can be created by using the maximum free space that is available in a RAID group.
Inputting the volume capacity is not required. "Standard" type volumes can be created using the
maximum free space.
For details on the parameters for this function, refer to
For the factory default settings for this function, refer to
The procedure to create an ODX Buffer volume is as follows:
Procedure
1
Click [Create ODX Buffer Volume] in [Action].
2
Specify the detailed information of the ODX Buffer volume and select the RAID group or TPP
in which the ODX Buffer volume is to be created.
"1.9.1 Setup Event Notification" (page 144)
301), or "3.7.1 Expand Thin Provisioning Volume" (page 285)
"3.2 Delete Volume" (page 272)
663
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"3.5 Expand Volume" (page
for details. To delete an "FTV"
"A.7.11 Create ODX Buffer Volume" (page
"Appendix B Create ODX Buffer Volume" (page
for details. If the
278), "3.9 Start
for details.
966).
1013).
P2X0-1270-13ENZ0