Modify Iscsi Host - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.2 Host Group Management
5
Click the [Done] button to return to the [FC/FCoE Host] screen.
4.2.16

Modify iSCSI Host

This function changes the iSCSI host information.
• When no iSCSI hosts are registered, the [Modify iSCSI Host] function cannot be used.
• When changing the information of an iSCSI host that is currently being used, make sure to stop access to
that iSCSI host.
• This function can change the following iSCSI host information; "Name", "iSCSI Name", "IP Version", "IP
Address", "Alias Name", "CHAP User ID", and "CHAP Password". When the iSCSI host is not registered in a
host group, the "Host Response" setting can also be changed.
• When the iSCSI host is registered in a host group, use the [Modify Host Group] function to change the
host response. Refer to
For details on the parameters for this function, refer to
The procedure to change the iSCSI information is as follows:
Procedure
1
Select the iSCSI host to change the host information for, and click [Modify iSCSI Host] in
[Action].
2
Input new iSCSI host information.
"4.2.7 Modify Host Group (iSCSI)" (page 391)
425
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
for details.
"A.4.2.11 Modify iSCSI Host" (page
End of procedure
835).
P2X0-1270-13ENZ0