Fujitsu ETERNUS DX60 S3 User Manual page 383

Chapter 4 Connectivity Management
4.2 Host Group Management
■ When registering a host by manually specifying the host
(1)
Click the [Manual Input] tab.
(2)
Click the [Add] button.
 The [Add SAS Host] screen appears.
(3)
Manually specify the SAS address of the host that is to be registered.
The main setting item is as follows.
●
Host Setting
• SAS Address
If an error screen appears under the following conditions, check the parameter settings.
•
•
The "SAS Address" is not entered
The "SAS Address" does not satisfy the input conditions
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
383
P2X0-1270-13ENZ0