Modify Host Group (Iscsi) - Fujitsu ETERNUS DX60 S3 User Manual

Chapter 4 Connectivity Management
4.2 Host Group Management
(6)
After adding or deleting FC hosts is complete, click the [Modify] button.
 A confirmation screen appears.
4
Click the [OK] button.
 Modification of the FC host group starts.
5
Click the [Done] button to return to the [Host Group] screen.
4.2.7

Modify Host Group (iSCSI)

This function performs the following modifications to the existing iSCSI host group.
• Changing the "Host Group Name" settings
• Changing the "Host Response" settings
• Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Hosts can be added to host groups which the host affinity setting has been already configured, or deleted
from host groups.
If a host is added, the host affinity setting is automatically configured to the host, as a host group member.
If a host is deleted, the host affinity setting is cleared from the corresponding host.
391
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
End of procedure
P2X0-1270-13ENZ0