Fujitsu ETERNUS DX60 S3 User Manual page 945

Appendix A Parameter List
A.7 Advanced Copy Management
• Initiator / Target Setting
Description
Input condition/
Display contents
●
Port Settings
• WWN
Description
Input condition/
Display contents
For screens in which FC port WWNs are displayed, refer to
• IP Version
Description
Input condition/
Display contents
• IP Address
Description
Input condition/
Display contents
Select the mode for a port which requires the copy path to be set as RA.
This item is displayed when the model is ETERNUS6000.
•
Initiator
•
Target
Input the WWN for the FC port.
A unique WWN in the ETERNUS Disk storage system is required.
The following content is displayed as the default setting:
•
When the "Storage System Information File" or "Path Information File" has been
read, the FC port WWNs that were specified in each file are displayed.
•
When the storage system information is manually specified, the FC port WWNs that
were created from the WWN of the ETERNUS Disk storage system are displayed.
•
Hexadecimal numbers (0 - 9, A - F, a - f)
•
16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
Select the IP version of the iSCSI port.
If the copy path is already specified for the port when the copy path information file is
being loaded, the IP version that is set for the port is selected as the default setting. For
other ports, "IPv4" is set as the default setting. This item is displayed only when the port
type is "iSCSI 1-Port" or "iSCSI 2-Port".
•
IPv4
•
IPv6 (Link Local)
•
IPv6 (Connect IP)
Input the IP address of the iSCSI port.
This item is required when "Port Type" is "iSCSI RA" (for older storage system connection),
"iSCSI-RA 1-Port", or "iSCSI-RA 2-Port" or when "IP Version" is "IPv4". If not specified, the
field is blank.
•
Numeric characters
•
First text box: "1" - "255"
•
Other text boxes: "0" - "255"
945
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
"Display screen of the FC port WWNs" (page 950).
P2X0-1270-13ENZ0