Fujitsu ETERNUS DX60 S3 User Manual page 414

Chapter 4 Connectivity Management
4.2 Host Group Management
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
•
•
•
•
•
•
•
•
(4)
Click the [OK] button
 Returns to the [Manual Input] screen.
(5)
Repeat
If an error screen appears under the following conditions, check the parameter settings.
•
•
•
•
•
•
•
The "Name" is not entered
The "Name" does not satisfy the input conditions
The "Name" is already used for the registration target host
The "iSCSI Name" is not entered
The "iSCSI Name" does not satisfy the input conditions
The "iSCSI Name" is already used for the registration target host
The "IP Address" does not satisfy the input conditions
The "Alias Name" does not satisfy the input conditions
The "Alias Name" is already used for the registration target host
The "CHAP User ID" does not satisfy the input conditions
The "CHAP Password" does not satisfy the input conditions
The "CHAP Password" and the "Confirm CHAP Password" do not match
Either of the "CHAP User ID" or the "CHAP Password" has been specified
Step (2) through Step (4)
The same "Name" is already used in the ETERNUS DX
The same "iSCSI Name" is already used in the ETERNUS DX
The "IP Address" is specified and an iSCSI host with the same "iSCSI Name" and "IP Address" is
already registered
The "IP Address" is not specified and an iSCSI host with the same "iSCSI Name" and "IP Version"
is already registered
The same "Alias Name" is already used in the ETERNUS DX
The number of hosts that is to be registered is "0"
The number of registered hosts has exceeded the maximum number for the ETERNUS DX
ETERNUS Web GUI User's Guide (Settings)
Copyright 2015 FUJITSU LIMITED
when registering several iSCSI hosts.
414
P2X0-1270-13ENZ0