Auto Wah - Sony DPS-V55 Manual

2 Channel Effects
33 Auto Wah (Wah)
The auto wah effect changes according
to the level of the input signal (auto
wah).
z
The Sens parameter lets you switch the
polarity of the wah effect.
Parameters
No. Name
– FxA(B) On/Off
1 Sens
2 Attack
3 Release
4 Mode Narrow, Normal, Wide, Low Choose "Narrow" for light wah, "Wide" for a deep wah, or "Low" for low band wah.
36
Range Comments
On, Off Turns the effect on or off.
–100 ~ 100 Determines the depth of the wah. Negative (–) values shift the sound from "wah"
(open) to "ooo" (closed) as the level of the input signal increases. Positive (+) values
shift the sound from "ooo" to "wah" as the level of the input signal increases.
0 ~ 50 Determines how long it will take to activate the effect when a signal is input. Larger
values take longer for the effect to activate.
0 ~ 50 Sets the time required for the effect to completely disappear when the input signal
decreases. Larger take longer for the effect to disappear.