Amp Simulator - Sony DPS-V55 Manual

2 Channel Effects
26 Amp Simulator (Amp)
This effect simulates a variety of
famous guitar amplifiers. Use Amp
Mode to select the type of amp you
want to simulate. Use Mic to
experiment with the positioning of the
virtual mic recording the sound from
the amp.
Parameters
No. Name
– FxA(B) On/Off
1 Amp Mode
2 Mic
3 Level L
4 Level R
30
Upper
Front
Range
On, Off
Amp-F, Amp-B, Amp-M, Amp-J
Front, Slant, Upper, On
0 ~ 100
0 ~ 100
MIC POSITION
On
Comments
Turns the effect on or off.
Determines the type of amp the effect will simulate.
Amp–F: a 2 speaker built in tube amp.
Amp–B: a 1 speaker built in tube amp.
Amp–M: a large stack–type amp.
Amp–J: a bright 2 speaker built in amp.
Simulates various mic positions used to catch the sound of the amp.
Front: Directly in front of the speaker.
Slant: Slanted sideways in front of the speaker.
Upper: Slanted slightly upward in front of the speaker.
On: Mic touching the speaker.
Sets the output level for the Lch (ch1).
Sets the output level for the Rch (ch2).
Slant