Driver - Sony DPS-V55 Manual

2 Channel Effects
24 Driver (Drive)
This is a distortion producing stereo
driver. The Color parameter lets you
choose from several varieties of
overdrive and distortion.
Parameters
No. Name
– FxA(B) On/Off
1 Gain
2 Level
3 Color
4 Tone
5 Blend
6 N.R.
28
CH1
(CH3)

Driver

Driver
CH2
(CH4)
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Determines the effect depth. Larger values create a more radical distortion.
0 ~ 100 Determines the output level of the driver effect
1 ~ 6 Selects the basic tonality of the distortion or overdrive. 1 = Overdrive from an old
distorting tube amp. 2 = Mid and Low band overdrive. 3 = Mid band overdrive. 4 =
Grungy feeling overdrive. 5 = Distortion from an fully cranked tube amp. 6 =
Overpowering "heavy metal" distortion.
–10 ~ +10 High band tone control. Larger values create a "tighter" sound.
0 ~ 100 Determines the percent of undistorted source sound to mix with the distortion.
Normally, set to "0" but you can increase this value to retain more of the source's
nuance.
0 ~ 100 Use this parameter to reduce unwanted noise. Increasing this value cuts more noise.
Blend Level
Blend Level
CH1
(CH3)
CH2
(CH4)