Stereo Pitch Shifter - Sony DPS-V55 Manual

2 Channel Effects
17 Stereo Pitch Shifter (StPCH)
The pitch shifter changes the pitch of
the input sound. The pitch of the input
sound is moved parallel and output
according to the value set in Pitch.
By increasing the Pitch FB L/Pitch FB R
(Pitch Feedback Left and Right), you
can create step-like undulating effects.
In this case, use PitchDly L/PitchDly L
(Pitch Delay Left and Right) to adjust
the timing and Pitch to adjust the pitch
width.
z
If you leave the Pitch value itself set near
0 and create a slight delay between the
source sound and the effect, you can
obtain a chorus effect with a somewhat
different flavor.
Parameters
No. Name
– FxA(B) On/Off
1 Pitch
2 PitchDly L
3 PitchDly R
4 Pitch FB L
5 Pitch FB L
6 Mode
7 Direct Level
8 Effect Level
CH1
(CH3)
Delay Pitch Shifter
Feedback
Delay Pitch Shifter
CH2
(CH4)
Range Comments
On, Off Turns the effect on or off.
–2400 ~ +2400 Sets the range of the pitch shift. 100 cent represents a semitone shift. 1200 cent
represents a 1 octave shift.
0 ~ 500 ms Determines how long it will take to activate the pitch shift effect for the Lch (ch1).
0 ~ 500 ms Determines how long it will take to activate the pitch shift effect for the Rch (ch2).
–99 ~ +99 Sets the pitch shifter feedback level for the Lch (ch1).
–99 ~ +99 Sets the pitch shifter feedback level for the Rch (ch2).
Fast, Soft Determines the "feel" of the sound. Choose "Fast" to speed up the effect, or "Soft"
when you want to soften the effect.
0 ~ 100 Determines the level of the direct sound.
0 ~ 100 Determines the level of the effect sound.
Direct
CH1
(CH3)
Effect
Effect
CH2
Direct (CH4)
21