2 Channel Effects
31
Tremolo (Treml)
Tremolo allows you to adjusts the
volume cyclically.
Parameters
No.
Name
–
FxA(B) On/Off
1
Rate
2
Depth
3
LFO Form
4
Ch Phase
5
Attack
6
Init. Mode
32
Vibrato (Vibrt)
Vibrato allows you to adjusts the pitch
cyclically.
Parameters
No.
Name
–
FxA(B) On/Off
1
Rate
2
Depth
3
LFO Form
4
Ch Phase
5
Attack
6
Init. Mode
Range
Comments
On, Off
Turns the effect on or off.
0 ~ 100
Sets the tremolo cycles.
0 ~ 100
Sets the tremolo depth. There is no effect at "0".
Sin, Tri
Selects the wave form.
0 ~ 20
Use to add a sense of left to right expansion or add an LFO phase difference. Does
not effect the tremolo when set to "0".
0 ~ 100
Determines how long it will take to start (or stop) the tremolo when ENTER (TAP) is
pressed.
On, Off
Determines wether the tremolo will start or stop when you press ENTER (TAP).
Range
Comments
On, Off
Turns the effect on or off.
0 ~ 100
Sets the vibrato cycles.
0 ~ 100
Sets the vibrato depth. There is no effect at "0".
Sin, Tri
Selects the wave form.
0 ~ 20
Use to add a sense of left to right expansion or add an LFO phase difference. Does
not effect the vibrato when set to "0".
0 ~ 100
Determines how long it will take to start (or stop) the vibrato when ENTER (TAP) is
pressed.
On, Off
Determines wether the vibrato will start or stop when you press ENTER (TAP).
35