Limiter - Sony DPS-V55 Manual

2 Channel Effects
27 Limiter (Limit)
This stereo limiter limits all signals
above the Threshold. The Bass and
Treble parameters let you emphasize
or limit or the frequencies effected by
the limiter.
CH1
(CH3)
CH2
(CH4)
Parameters
No. Name
– FxA(B) On/Off
1 Threshold
2 Ratio
3 Release
4 Level
5 Bass –24.0 dB ~ +12.0 dB
6 Treble –24.0 dB ~ +12.0 dB
7 Range
8 Mode
Bass
Control
Source
Detector
Bass
Range Comments
On, Off Turns the effect on or off.
0 ~ 100 Determines the signal level necessary to activate the limiter. Smaller values allow the
limiter to activate in response to smaller signal levels.
1:1 ~ 1:∞ Determines the ratio of compression for signals exceeding the Threshold. Larger
values create more drastic compression.
0 ~ 100 Sets the time required for the effect to completely disappear once the input signal
goes below the Threshold. Larger values retain create a slower release.
0 ~ 100 The limiter changes the sound level of the input signals. This parameter lets you set
the output level from the limiter.
Low band equalizer that allows you to determine which signals are sent to the limiter.
Most effective when used during mixdown.
High band equalizer that allows you to determine which signals are sent to the limiter.
Most effective when used during mixdown.
Flat, 0 ~ 10 Determines which frequencies the limiter will "center" on. When set to "Flat" the limiter
operates on the entire frequency band.
Link, Dual To have process the left (L) and right (R) channels together, select "Link". To process
them separately, select to "Dual".

Limiter

Treble
Detector
Detector
Treble
Limiter
CH1
(CH3)
Level
CH2
(CH4)
31