Panasonic DBS-576 Technical Manual page 540

FF7: Applications
Introduction
API Port Extension Numbers
(all CPCs) - Version 1.0 or higher
Assign the extension number that can be dialed to reach the API port.
0
System
Configuration
FF7 2 (BSS) 01 (01-08) 00 Hold (Ext.No.) Hold
FF1
BSS: API Card Position
B=Cabinet no. 1-6
System
SS=Slot No. where API port
is located (01-11)
FF2
Notes:
Trunks
The API Port Number should be the phantom extension number. It cannot be the existing extension
number.
FF3
For example, when you select Card Type 80 (2 API ports) in Free Slot Assignment, you can only enter
Extensions
API Port No.1 or No. 2 in this address.
Related Programming:
FF4
Free Slot Assignment (pg. 0-5)
FF-/Soft Keys
FF5
API Port Tenant Group Assignment
Groups
(all CPCs) - Version 1.0 or higher
Assign each API port to a Tenant Group, for the outgoing function.
FF6
TRS/ARS
BSS: API Card Position
FF7
B=Cabinet no. 1-6
Applications
SS=Slot No. where API port
is located (01-11)
FF8
Notes:
Maintenance
Tenant Groups can be used for controlling MCO access and SSD block assignment.
Related Programming:
FF1 3: MCO Access in Tenant Groups (pg. 1-163)
Appendix A
FF1 0 15, 16, and 17: SSD Blocks (pg. 1-99)
Appendix B
Page 7-14
01 (1-6) (01-12) Hold (1-99) Hold
FF7 2 (BSS) 01 (01-08) 01 Hold (1-72) Hold
DBS 576 (USA) issued 05/20/98
API Port No.
(max. 8 channels)
API Port No.
(max. 8 channels)
Section 400-Programming
$
/$ &-,
Extension No. (1 to 4 digits)
default: [no assignment]
$
/$ % 1!-6
Tenant Group No. 1-72
default: 1
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B