Panasonic DBS-576 Technical Manual page 490

FF6: TRS/ARS
Introduction
Analyze Digits Table: Follow Digit Maximum
(all CPCs) - Version 1.0 or higher
(for ARS/TRS only) Assign the maximum number of digits the user can dial after the
0
Analyze Digit string (defined in the previous address).
System
Configuration
FF1
System
FF2
Notes:
Trunks
This address applies only to ARS/TRS routing; it does not apply when TRS is used without ARS.
The system will start analyzing the call immediately after the end-user has dialed the maximum (1-16)
FF3
set in this address. However, if this address is set to 0 (no maximum), the system doesn't know how
Extensions
many digits will be dialed. Therefore, the system will wait until the appropriate Interdigit Timer
expires before processing the call.
FF4
Related Programming:
FF-/Soft Keys
Analyze Digits Table: Digit String (pg. 6-11)
Interdigit Timer (ARS and ISDN CO) (pg. 1-120)
Interdigit Timer (DP SLTs) (pg. 1-141)
FF5 Interdigit Timer (DTMF SLTs) (pg. 1-142)
Interdigit Timer (Digital Keyphones) (pg. 1-142)
Groups
FF6
Analyze Digits Table: TRS Level
TRS/ARS
(all CPCs) - Version 1.0 or higher
Assign a TRS Level to each Analyze Digits entry. This TRS Level must be
FF7
lower than the path's or originator's TRS Level for the call to be allowed.
Applications
FF8
Maintenance
Notes:
The TRS Level you assign to this dial string (above address) will be compared to the TRS Level
Appendix A
assigned (in FF6 1) to the path or originator of the call attempt. The call will be allowed only if the dial
string's TRS Level is lower than the path/originator's TRS Level.
Appendix B
Page 6-12
FF6 0 01 (001-500)
Analyze Digits Entry
(Bin) No. 001-500
FF6 0 01 (001-500)
Analyze Digits Entry
(Bin) No. 001-500
DBS 576 (USA) issued 05/20/98
0003 Hold
Maximum No. of Dialed Digits Allowed
after Analyze Digit string (0-16)
default: 0 (no maximum)
FF6 0 01 (001-500) 0002 Hold (up to 8 digits) Hold
FF1 1 01 0010 Hold (1-255) Hold
FF1 1 03 0006 Hold (0-255) Hold
FF1 1 03 0007 Hold (0-255) Hold
FF1 1 03 0008 Hold (0-255) Hold
0004 Hold
Section 400-Programming
"  "!,,!; 1%
(0-16) Hold

"  % 5(,
(0-8) Hold
TRS Level 0-8
default: 0
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B