Panasonic DBS-576 Technical Manual page 498

FF6: TRS/ARS
Related Programming:
Introduction
FF6 2 03: Route List Table (pg. 6-28)
0
System
Configuration Trunk Queuing for Originator (Route List)
(all CPCs) - Version 1.0 or higher
(for ARS/TRS only) Set whether the phone user will be queued (waiting) for an
FF1
available trunk when attempting to seize a busy Trunk Group during ARS routing.
System
FF2
Trunks
FF3
Extensions
Notes:
This address applies only when ARS/TRS is used. It does not apply when TRS alone is used.
FF4
This setting will be used in the Route List Table (pg. 6-28). If set to 1=Enable (default), the call will be
FF-/Soft Keys
queued until a trunk in the current Route's trunk group becomes available, or the Queuing Timer
(ARS) (pg. 1-136) expires, whichever occurs first. If the Queuing Timer expires first, the call will move
to the next-priority route.
FF5
However, if set to 0=Disable, the call will go immediately to the next-priority route in the Route List
Groups
Table.
Related Programming:
FF6
FF6 2 03: Route List Table (pg. 6-28)
TRS/ARS
Queuing Timer (ARS) (pg. 1-136)
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B
Page 6-20
FF6 1 01 (01-50)
TRS Class No. 1-50
assigned to the originator
of an outbound call
(extension, DISA trunk, etc.)
FF1 1 02 0014 Hold (0-255) Hold
DBS 576 (USA) issued 05/20/98
0003 Hold (0 or 1) Hold
0=Disable Queuing; go to next-priority
route in Route List Table.
1=Enable Queuing; wait for available
trunk in current Trunk Group.
(default)
Section 400-Programming
5  D%
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B