Panasonic DBS-576 Technical Manual page 531

Section 400-Programming
Introduction
VPU Port Tenant Group Assignment
(all CPCs) - Version 1.0 or higher
Assign a Tenant Group to each VPU Port (if required). This Tenant Group
0
assignment will apply during outbound dialing.
System
Configuration
FF1
B11: VSSC Card Position --
System
B=Cabinet 1-6
11=Free Slot 11
FF2
Trunks
FF3
Extensions
Notes:
This Tenant Group assignment can be used for outside notification (for example, Voice Mail
automatically calling your pager after receiving a message in your mailbox).
FF4
FF-/Soft Keys
Related Programming:
FF5
Groups
VPU Port TRS Class Assignment (Day/Night)
FF6
(all CPCs) - Version 1.0 or higher
TRS/ARS
Assign a TRS Class (if required) to each VPU Port.
FF7 0 (B11) 01 (01-16) 02 (0 and 1) Hold (1-50) Hold
FF7
Applications
B11: VSSC Card Position --
B=Cabinet 1-6
11=Free Slot 11
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF7 0 (B11) 01 (01-16) 01 Hold (1-72) Hold
NOTE: Available range depends
on VPU card(s) installed:
VPU Port No.
NOTE: Available range depends
on VPU card(s) installed:
VPU/4 = 01-04
VPU/8 = 01-08
VPU/4 + VPU/4 = 01-08
VPU/4 + VPU/8 = 01-12
VPU/8 + VPU/8 = 01-16
DBS 576 (USA) issued 05/20/98
VPU Port No.
VPU/4 = 01-04
VPU/8 = 01-08
VPU/4 + VPU/4 = 01-08
VPU/4 + VPU/8 = 01-12
VPU/8 + VPU/8 = 01-16
0=Day 1&2 mode
1=Night mode
FF7: Applications
$
&2 % 1!-6
Tenant Group No. 1-72
default: 1
$ '
&2 % ,
TRS Class No. 1-50
default: 1
Page 7-5
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B