Panasonic DBS-576 Technical Manual page 140

FF1: System Programming
Notes:
Introduction
There are two DID/DNIS tables available. This parameter determines which table to use for the related
COS. For instance, Table "A" could be used for DID, and Table "B" for DNIS.
0 Related Programming:
System
Configuration
DID/DNIS Dial Table ("A" Side) (pg. 1-169)
DID/DNIS Dial Table ("B" Side) (pg. 1-171)
FF1
System
Trunk COS: Paging on DISA/Tie-Line Call
(all CPCs) - Version 1.0 or higher
FF2
Set whether a DISA or E&M tie-line caller can page on trunks in this
Trunks
Class of Service (COS).
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
Notes:
FF6
TRS/ARS
Related Programming:
Splash Tone: Internal Paging (pg. 1-9)
FF7
Paging Answer on Tie-Line (pg. 1-29)
Applications
Paging Timer (Tie-Lines) (pg. 1-135)
Extension COS: Paging (pg. 1-48)
FF2 0: Analog Trunks (E&M Tie) (pg. 2-37)
FF8 FF2 2: T1 Trunks (E&M Tie) (pg. 2-116)
Maintenance
Appendix A
Appendix B
Page 1-78
FF1 0 04 (00-15) 05 Hold (0 or 1) Hold
Trunk COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15
07=COS 8 15=COS 16
FF1 0 01 0002 Hold (0 or 1) Hold
FF1 0 02 0013 Hold (0 or 1) Hold
FF1 1 02 0012 Hold (0-255) Hold
FF1 0 03 (00-15) 15 Hold (0 or 1) Hold
DBS 576 (USA) issued 05/20/98
FF1 4 02 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
FF1 4 04 (000-575) (1-6) Hold (0-9999 or 1-72) Hold
0=Do not allow paging during DISA/tie-line
call. (default)
1=Allow paging during DISA/tie-line call.
Section 400-Programming
))$ %
<))=#   >
576-13-400
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B