Panasonic DBS-576 Technical Manual page 109

Section 400-Programming
Notes:
Introduction
If this Direct Trunk Access is set to "1" (Do not allow), use the MCO Outgoing Group (press the MCO
key) to seize a trunk.
Related Programming:
0
System
Configuration
Tenant Group MCO Access: Outbound Trunk Groups (pg. 1-164)
Hold
FF1
System
Extension COS: MCO Incoming Call Answer
(all CPCs) - Version 1.0 or higher
FF2
Allow/Restrict the ability to pick up incoming calls in MCO (Incoming) trunk groups
Trunks
that are ringing on other extensions besides those in this Class of Service (COS).
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
Notes:
FF6
TRS/ARS
Related Programming:
FF7
MCO-Inbound Trunk Group Members (pg. 5-20)
Applications
FF8
Maintenance
Appendix A
Appendix B
576-13-400
FF1 0 03 (00-15) 14 Hold (0 or 1) Hold
Extension COS Nos. 1-16
00=COS 1 08=COS 9
01=COS 2 09=COS 10
02=COS 3 10=COS 11
03=COS 4 11=COS 12
04=COS 5 12=COS 13
05=COS 6 13=COS 14
06=COS 7 14=COS 15 (for VM)
07=COS 8 15=COS 16 (for Attendant)
DBS 576 (USA) issued 05/20/98
FF1 3 01 (0001-0360) Hold (0-99 or 0-72)
0=Allow call pickup in other
MCO trunk groups. (default)
1=Do not allow call pickup in
other MCO trunk groups.
FF5 3 (01-99) (001-576) Hold (1-576) Hold
FF1: System Programming

)) * 2# /)
<))=#   >
Page 1-47
Introduction
0
System
Configuration
FF1
System
FF2
Trunks
FF3
Extensions
FF4
FF-/Soft Keys
FF5
Groups
FF6
TRS/ARS
FF7
Applications
FF8
Maintenance
Appendix A
Appendix B