Figure 1-2 Control Range For Qos Queue Attribute And Qos Interface Information - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Connection branching:
Constituting definition command
Interlocking with QoS transmission control
Queue mode shall be set to control the sequence of outputting a packet to the
transmission queue in the interface. The queue mode includes the following five
catergories: output priority control, minimum band assurance, uniformity
assurance, minimum uniformity band assurance, and minimum band assurance
(kbps designation). The definition method defines a queue list to be set in the
transmission queue of the interface by using the QoS attribute (qos-queue-list)
and further sets a queue list to be used on each interface by using the QoS
interface information (qos-interface).
3.2 qos-queue-list (Qos queue attribute)
3.3 qos-interface (QoS interface information)
Flow Control (input)
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
: Control range of this command

Figure 1-2 Control Range for QoS Queue Attribute and QoS Interface Information

Interlocking with QoS queue control
The queue control is a function that discards a packet to be stacked on the
transmission queue according to the queuing priority if the packet is stagnating
in the transmission queue. The function sets the pattern of queue length
permitting the queuing on each queuing priority by using the QoS discard mode
(qos-discard-mode).
1-4
Selects and transmits the packet to the specified DLCI/VC in
accordance with the flow detecting condition.
1, 3 flow filters (QoS flow information)
Defines using and unusing of each control.
Flow Control (output)
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Queue Control
Transmission Control
(LINE,DLCI, etc.)
Interface
GR2K-GA-0014
Ver. 07-02