Hitachi GR2000 Series Configuration Commands page 300

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
Default:
Range of value
Description:
Default:
Description:
Default:
Examples
1. Parameter configuration
To set the aging of the filtering-database to 300 seconds, and the static entry for
the MAC address to
2. Parameter modification
To change operation of the number 2 filtering-database entry to drop:
3. Configuration display
4. Configuration deletion
To delete the filtering-database information's second entry:
2-34
Sets the static entry MAC address to register with the
filtering-database in canonical representation.
Cannot be omitted
Set MAC address to 48 bits.
This sets filtering:
drop
specified MAC address, and
destination from the specified MAC address to the indicated
interface address. It also deletes the frame when receiving the
specified frame from the indicated interface.
Cannot be omitted
Indicate the interface you selected for forwarding during
filtering. The DLCI name can be specified for Frame Relay, and
the VC name and group name can be specified for ATM. The
Peer Name can be specified for ISDN.
Cannot be omitted
11:22:33:11:11:11:
deletes all frame destinations of the
relays the frame
forward
GR2K-GA-0014
Ver. 07-02