Dns-Resolver - Hitachi GR2000 Series Configuration Commands

Precautions
Multiple host names must not be defined to the same IP or IPv6 address.
"localhost" must not be defined as the host name.
"127.*.*.*" must not be defined as the IPv4 address.
The class D or class E address must not be defined as an IPv4 address.
Global address and site local address may be specified as the IPv6 addresses.
If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
Host names are not distinguished with capital letters and small letters.
Do not set multiple IP and IPv6 addresses in the same host name.
4.1.2

dns-resolver

Function
Sets DNS resolver information.
Input Format
To set own host name:
To set domain name:
To set name server:
To set DNS resolver function:
To set the relay function's effectiveness and ineffectiveness:
To delete DNS resolver information:
To delete name server:
To delete the relay function setting information:
To delete own host name:
GR2K-GA-0014
Ver. 07-02
Operation Management Information
4-3