Qos-Ip-List-Group (Information On Qos Ip Frame Condition Group Of The Old Bsd Unix-Based Command System) - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1.2.6 qos-ip-list-group (Information on QoS IP Frame Condition Group of the Old
BSD UNIX-based Command System)
Establishes the QoS IP frame condition group settings. Combines QoS IP frame
condition list which is defined in the QoS IP frame condition settings with the
determination numbering. The maximum number of QoS IP frame condition groups
that can be generated is 256 groups, and the maximum number of QoS IP frame
condition lists which can be registered in a group is 1024.
Input Format
Setting information
Adding settings
Deleting settings
Displaying settings
Inserting settings
Parameters
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
Range of value:
1-194
This parameter sets the name of the IP frame condition group
All groups displayed
Available characters are a maximum of 14 alphanumeric
characters (first character must be alphabetic).
This parameter sets QoS IP frame condition list number. A
maximum of 1024 lists can be registered.
(Define the QoS IP frame condition list before entering this
command.)
Deletion by a unit of designated group.
1-1024
This parameter sets QoS IP frame condition list number in the
inserting position. Inserts one before the designated condition
list.
Cannot be omitted. Set QoS IP frame condition group number
registered in QoS IP frame condition group being inserted.
1-1024
GR2K-GA-0014
Ver. 07-02