Configuring Pos Inputs - Bosch DB18C3100R2 Installation Manual

86 en | Default Configuration
6.5.8

Configuring POS Inputs

Inputs and outputs menu > POS inputs tab
A POSserver (POS= point of sale) is connected via the IP network (LAN). To do this, the
DiBos IP address must be configured in the POS server. A maximum of 64 virtual inputs are
available in DiBos. When activating defined transactions at the POS points, an image is
automatically recorded.
1
2
3
4
F.01U.033.308 | V7 | 2009.09
POS inputs
Port number:
Data structure:
Edit
Installation Guide
Click the tab.
Enter the DiBos port number to which the IP server
sends the data.
Note:
The port number in the DiBos configuration must
match the port number that has been entered in the
POS server.
Shows the structure of the data stream that is sent to
DiBos by the POS server. It is possible to have a
maximum of 10 data fields as distinguishing factors. A
maximum of 100 characters are possible per data
field.
Click the button. A dialog box opens in which you can
configure the type of data field and the corresponding
start and end position in the data stream.
Note:
Mark in advance the rows to be processed under
Data structure.
DiBos/DiBos Micro
Bosch Sicherheitssysteme GmbH