DiBos/DiBos Micro
6.5.3
Configuring Alarm Simulation
Inputs and outputs menu > Alarm simulation tab
The video system supports 4 inputs for the triggering of user alarms in the user interface.
1
2
3
4
Bosch Sicherheitssysteme GmbH
Alarm simulation
Type
Name
Save
Installation Guide
Click the tab.
Click the down arrow in the column and select
whether an input is to be activated or not.
Input is to be used for alarm simulation.
Input is not to be used for alarm simulation.
Place the cursor in the column and enter the name.
The entries are saved.
Default Configuration | en
F.01U.033.308 | V7 | 2009.09
75