Bosch DB18C3100R2 Installation Manual page 64

64 en | Default Configuration
3
4
F.01U.033.308 | V7 | 2009.09
Audio:
Pre-alarm time [sec.]:
Post-alarm time
[secs.]:
Motion recording
Rate:
Quality:
Audio:
Pre-alarm time [sec.]:
Post-alarm time
[secs.]:
Pre-alarm recording
Rate:
Quality:
Audio:
Installation Guide
Activate this check box if audio is also to be recorded along
with this job.
Note:
The audio input must be assigned to the camera. This is done
under Video and audio connections
camera General settings
Select the pre-alarm time for the alarm and motion recording.
Note:
The maximum pre-alarm time is 1800 seconds. The pre-alarm
time depends on the recording rate of the pre-alarm
recording. A maximum of 3600 images can be recorded for
each pre-alarm and by each camera. Example: 1 image/
second = 1800 seconds, 2 images/second = 1800 seconds,
4 images/second = 900 seconds, 5 images/second =
720 seconds etc.
Enter the post-alarm time.
Note:
The maximum post-alarm time is 999 seconds. The default
setting is 0 seconds.
Make the settings for motion recording.
Select the recording rate.
Select the recording quality.
Activate this check box if audio is also to be recorded.
Select the pre-alarm time for the alarm and motion recording.
Note:
The maximum pre-alarm time is 1800 seconds. The pre-alarm
time depends on the recording rate of the pre-alarm
recording. A maximum of 3600 images can be recorded for
each pre-alarm and by each camera. Example: 1 image/
second = 1800 seconds, 2 images/second = 1800 seconds,
4 images/second = 900 seconds, 5 images/second =
720 seconds etc.
Enter the post-alarm time.
Note:
The maximum post-alarm time is 999 seconds. The default
setting is 0 seconds.
Make the settings for pre-alarm recording.
Select the recording rate for the pre-alarm time. The
recording rate applies to alarm recording and motion
recording.
Select the recording quality.
Activate this check box if audio is also to be recorded.
DiBos/DiBos Micro
Add or modify
Audio input.
Bosch Sicherheitssysteme GmbH