How Do I View Logs; How Do I View Component Status - Huawei NetCol8000-E220 User Manual

NetCol8000-E220 Modular Indirect Evaporative
Cooling System
User Manual
Procedure
Step 1 Tap T/H Curve on the home screen.
Figure 11-12 T/H Curve screen
----End

11.3.3 How Do I View Logs?

Context
The Logs screen displays the operations performed by the user.
Procedure
Step 1 Choose Maintenance > Logs on the home screen.
----End

11.3.4 How Do I View Component Status?

Context
You can view the component status on the display module in the following two
ways:
Issue 10 (2024-01-30)
NO TE
● The temperature curve (upper) and the humidity curve (lower) are displayed on the
same screen. The abscissa shows time. The temperature setpoint is the midpoint
temperature on the upper ordinate while the humidity setpoint is the midpoint humidity
on the lower ordinate.
● The temperature and humidity curves show the current average temperature and
humidity of the control point.
● You can tap or
ordinate. The midpoint temperature and humidity are the temperature and humidity
setpoints after the ordinate range is zoomed in or out.
● The temperature display range is from ±3°C to ±30°C of the temperature setpoint.
● The humidity display range is from ±5% to ±50% of the humidity setpoint. The
displayed value varies according to units. The actual displayed value may vary.
Copyright © Huawei Digital Power Technologies Co., Ltd.
to zoom in or out the range of the temperature and humidity
11 FAQ
175