2-5-4 Installation of attached software
The following software is stored in the attached CD-ROM "Laser Processing Utility_VL-W1".
To use these software, install the data in the CD-ROM to the commercially available PC.
Stored data in the CD-ROM
Name of software
Logo Data Conversion Software
Logo Data Editing Software
Operating environment
Install the attached CD-ROM "Laser Processing Utility_VL-W1" in the following environment.
Item
OS *1
Free area on hard disk
CD-ROM drive *2
USB port *3
Memory capacity
CPU
Display resolution
Others
*1 : OS versions of which Microsoft has ended support are excluded. The CPU type, memory capacity, hard-disk space,
and display function required to operate each OS should be provided in accordance with the recommendation of
Microsoft.
*2 : To install the software on a PC without a CD-ROM drive, copy all CD-ROM data to the PC using external storage
media such as a USB flash drive before installation.
*3 : We do not guarantee the connection of all PC and laser welding machine.
Installation procedures
Set the CD-ROM "Laser Processing Utility_VL-W1" to the PC and the installation will start automatically.
Install "Laser Processing Utility_VL-W1-N" by following the instructions shown on the screen.
If the installation screen does not appear, double-click on following file to start installation.
[CD-ROM]\Setup\setup.exe
Description
Converts the drawing data in DXF/JPEG/BMP/HPGL formats to the laser welding
machine dedicated format "VEC".
Creates and edits the drawing data in VEC format.
Installation requirements
®
®
Microsoft
Windows
11 Pro 32bit, 64bit
®
®
Microsoft
Windows
10 Pro 32bit, 64bit
100MB or more
1 set or more
USB1.1 or later
1GB or more
1GHz or more
1024 x 768 pixels or above
Pointing device such as a mouse and character input device such as a keyboard
ME-VLW1N-SM-1
61