Panasonic VL-W1-N Series Setup And Maintenance Manual page 62

„ Connecting with Logo Data Editing software
When uploading the drawing file (.VEC) created by
the attached software "Logo Data Editing" to the laser
welding machine, connect the PC with the attached
USB cable.
• For details of uploading a VEC file, refer to
Operation manual and Logo data editing operation
manual.
• If the communication error occurs with the Logo
Data editing software, the USB driver may not have
been installed correctly. Re-install the USB driver.
• Updating the USB driver may resolve the error. The latest version of the USB driver can be downloaded from our Internet
website.
https://industrial.panasonic.com/ac/e/dl_center/software/
62
To USB connector B
Front of controller
USB cable
ME-VLW1N-SM-1
PC