Working Field And Center Position - Panasonic VL-W1-N Series Setup And Maintenance Manual

2-3-4 Working field and center position

Specified point
Center position of laser emission port
q
Center position of laser emission port
w
Work distance (base position)
e
Work distance (setting range)
r
Working field (X, Y)
t
• Do not place anything in the area between the laser emission port and lasing object during the lasing operation.
• Use anti-reflection material (ex. black paint for metal) for an external shutter or a protective enclosure in a path of laser
beam. It may cause a failure of the components inside the head.
• If any other devices such as a sensor or a camera are installed near the laser welding machine, make sure that these
devices are installed in the place where laser beam and its reflected beam do not damage to them.
w
e
t
VL-W1500-N VL-W1A00-N
315 mm
200 mm x 200 mm
ME-VLW1N-SM-1
q
r
t
Model
VL-W1506-N
81.5 mm
109 mm
685 mm
± 15 mm
400 mm x 400 mm
VL-W1A06-N
45