Air Filter - Panasonic VL-W1-N Series Setup And Maintenance Manual

7-2-3 Air filter

One air filter is placed in the air-cooling area of the controller.
„ Effect from deterioration
The air filter soiled with dust may reduce the cooling effect of the air-cooling fan. This may cause the performance to
degrade, or failure of the laser welding machine.
„ Replacement interval
• There is a broken part, or contamination that cannot be removed by cleaning.
„ Models of replacement parts
For details of purchasing air filters, please contact our sales agency.
Model Remarks
LP-AFT50x5 Set of 5 pieces for the controller
„ Steps for cleaning (Daily maintenance) and replacement of air filter
Clean air filters regularly according to the usage environment.
1.
Turn OFF the key switch of the controller, and disconnect the AC power cable.
2.
Loosen the screws of front panel at 2 positions, and remove
them.
3.
Remove the filter.
4.
Clean the filter with neutral detergent and air-dry it.
5.
Attach the dried filter onto the front panel, and tighten it with
the screws.
Tightening torque: 0.3N·m
• Do not attach the filter when it is wet. This may cause the cooling
capacity to degrade, or failure of the laser welding machine.
ME-VLW1N-SM-1
3
2
143