Bosch AMAX panel 2100 Installation Manual page 85

AMAX panel
How to copy parameters from the key to the AMAX panel
1.
2.
3.
LED/LCD keypads can also be used to copy key parameters to the AMAX panel.
Bosch Sicherheitssysteme GmbH
All manuals and user guides at all-guides.com
Connect the programming key to the Printed Circuit Board (PCB) plug of the AMAX panel.
Please note that the direction of the programming key should be consistent with the
direction marked on the PCB.
Select text keypad installation menu ADDRESS / KEY PROGRAM – COPY DATA TO
PANEL and press [#].
After successfully copying the programming data in the programming key to the AMAX
panel, a confirmation tone occurs. Wrong prompt tone and display of Failure of Key
Parameters to AMAX Panel indicate a damage of the programming key data. In this case,
the data needs to be copied onto the AMAX panel again.
Unplug the programming key from the AMAX panel.
Installation Manual
Settings | en 85
2015.05 | 06 | F.01U.309.277