Direct Connection - Bosch AMAX panel 2100 Installation Manual

100 en | Configuration
Figure 7.12: AMAX panel configuration – installer code
7.2.1

Direct Connection

The direct connection function allows establishing a connection from the remote PC to the
AMAX panel via USB cable.
1.
2.
3.
4.
2015.05 | 06 | F.01U.309.277
All manuals and user guides at all-guides.com
Plug the cable into the USB port of the AMAX panel and connect the other side of this
cable to a USB port of the PC running the A-Link Plus software.
Install the USB driver. The device driver is located in the A-Link plus software path
(example: C\\program files (x86)\Bosch Security System\A-Link Plus\USB_DRIVER).
The installation creates an additional COM device on the PC.
When the installation has finished, identify the COM port associated to this device.
Select File – Communication Settings.
Installation Manual
AMAX panel
Bosch Sicherheitssysteme GmbH