Panasonic KX-NS700 Feature Manual page 343

Number in
the Pattern
(9)
(10)
The following data can be controlled through system programming to adjust whether (or how) they are
printed or displayed by SMDR.
[Programmable Items]
Outgoing CO line call
Incoming CO line call
Outgoing intercom call
Log-in/Log-out status
ARS dial
Document Version 2017-06
Data
CD (Condition Shows other call information using the following codes:
Code)
TR: Transfer
FW: Call Forwarding (FWD) to CO line
D0: Call using Direct Inward System Access (DISA) or TIE line
service
RM: Remote maintenance (modem) (→ 15.1.4 PC
Programming)
NA: Not answered call
RC: Received call
AN: Answered call
VR: Received call with Call Waiting Caller ID (Visual Caller ID)
VA: Answered call with Call Waiting Caller ID (Visual Caller ID)
Cost Shows the call charge. This is not available if your telephone
company does not provide a call charge reporting service.
Item
Controls whether outgoing CO line calls are shown. This setting
is common throughout the PBX. COS programming is also
required.
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
—Print Information—Outgoing Call
Controls whether incoming CO line calls are shown.
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
—Print Information—Incoming Call
Controls whether outgoing intercom calls are recorded.
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
—Print Information—Intercom Call
Controls whether the Log-in/Log-out status of extensions is
recorded.
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
—Print Information—Log-in / Log-out
Controls whether the user-dialed number or the ARS-modified
number is shown.
The Host PBX Access code ("=" followed by the access code)
can be shown (as supplementary information) only when the
modified number is selected in this setting. (→ 2.1.3 ARS
(Automatic Route Selection))
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR
Options—Option—ARS Dial
18.1.7 SMDR (Station Message Detail Recording)
Description
Description
Feature Manual 343