Panasonic KX-NS700 Feature Manual page 134

Hybrid ip-pbx
Hide thumbs Also See for KX-NS700:
Table of Contents

Advertisement

7.1.2 Flash/Recall/Terminate
Flash/Recall Mode: Disconnects the line and the extension user hears the dial tone from the line used last.
For example, if a CO line call is disconnected, the extension user will hear a new dial tone from the same
CO line.
Terminate Mode: Disconnects the line and the extension user hears a dial tone via the preferred CO line.
(→ 12.1.3 Line Preference—Outgoing)
Conditions
FLASH/RECALL Button Mode
One of the following modes can be selected for each extension through system programming:
Flash/Recall mode
Terminate mode
EFA mode (→ 6.1.1 EFA (External Feature Access))
Terminate Button
Any flexible button can be customized as the Terminate button.
Disconnect Time (Only for Flash/Recall Mode)
The amount of time between successive accesses to the same CO line is programmable for each CO line
port.
This feature generates a Station Message Detail Recording (SMDR) call record (→ 18.1.7 SMDR (Station
Message Detail Recording)), restarts the call timer, inserts a pause, and checks the Toll Restriction (TRS)
level (→ 19.1.5 TRS (Toll Restriction)) again.
The Terminate feature will be performed when pressing the FLASH/RECALL button regardless of the
mode that the FLASH/RECALL button has been set to, in the following situations:
When a call is made using ARS. (→ 2.1.3 ARS (Automatic Route Selection))
When a CO line call is made with the INTERCOM button.
When a CO line call is made with an Incoming Call Distribution (ICD) group button.
For general SIP phones, the function of a FLASH button differs depending on the phone, and its
functionality does not depend on the setting specified in the PBX.
PC Programming Manual References
9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port—Disconnect Time
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings—Option 7—Flash
Mode during CO Conversation
12.1.4 PBX Configuration—[4-1-4] Extension—Wired Extension—Flexible Button—Type
12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension Settings—Option 7—Flash
Mode during CO Conversation
12.2.3 PBX Configuration—[4-2-3] Extension—Portable Station—Flexible Button—Type
PT Programming Manual References
[418] LCOT Disconnect Time
Feature Manual References
7.1.3 Flexible Buttons
134
Feature Manual
Document Version 2017-06

Advertisement

Table of Contents
loading

Table of Contents