Table of Contents
Advertisement
en Cleaning and servicing
Setting
Standby after
Display brightness
Volume
Key tones
Boiling point automatism 0 m - 50 m
Factory settings
1
Factory setting
19 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
19.1 Cleaning products
Only use suitable cleaning products.
90
Selection
¡ SSID
¡ MAC address
¡ Serial number
5 mins - 1 hr
1
15 mins
10% - 100%
1
50%
off
1
1: quiet
2: medium
3: loud
1
on
off
1
51 m - 300 m
301 m - 600 m
601 m - 900 m
901 m - 1200 m
1201 m - 1500 m
1501 m - 1800 m
> 1800 m
-
ATTENTION!
Using unsuitable cleaning products
can damage the appliance.
▶
▶
▶
▶
Description
Set the duration after
which the appliance
automatically switches to
standby mode if there is
no action on the display
or if the appliance is run-
ning.
Set the display bright-
ness in 10% steps.
Set the volume of the
tones.
Set the key tones.
Set your altitude above
sea level to adjust the
boiling point.
Reset edited settings
back to the factory set-
tings.
Do not use harsh or abrasive
cleaning products.
Do not use cleaning products with
a high alcohol content.
Do not use corrosive or aggressive
cleaning products or ones contain-
ing chlorine or calcium carbonate.
Do not use oven cleaner.
Advertisement
Chapters
Table of Contents
