Samsung CLX-9252 Series Service Manual page 395

● Code :
S3-3211
● Symptom / Cause :
At system booting, the MFP could not detect the DAD
DADF could not detect the paper. ( The green LED of
● Troubleshooting method :
1. Reboot the MFP.
Check the initial operation of DADF (whether the m
2. Is power supplied to the DADF board?
3. Check the connection between DADF board and Sc
Is it connected properly?
Yes : Replace the DADF board(JC92-02446A)
(Refer to 3.22.4 DADF Main Board)
Scan joint board
4. Check the connection between Scanner and Main b
If th If the connection is OK, replace the Scan Joint boa ti
(Refer to 3.3.4 Scan Joint board)
Service Manual
● Error message :
Scan System Failure
i OK l th S
7. Troubles shooting
:
e #S3-3211 : Turn off then on.
F.
DADF external is off. )
otor is working or not)
can Joint board.
DADF board
board.
J i t b ard(JC92-02579A) d(JC92 02579A)
7-9 98
SAMSUNG ELECTRONICS