Table of Contents
Advertisement
● Code :
S1-2411
● Symptom / Cause :
1. Hard Disk is not installed in the machine.
2. Hard Disk cable is not connected correctly.
3. Hard Disk is defective.
● Troubleshooting method :
1. Check if the HDD is installed properly.
a) Remove the rear cover and main board plate.
) R
th
b) Check if the HDD cable is connected to the main
2. If the problem persists, replace the
(Refer to 3.8 HDD)
Service Manual
7. Troubles
shooting
● Error message :
:
HDD System Failure
e: #S1-2411. Turn off then on.
d
i b
d l t
n board correctly.
HDD(JC59-0003
35A)
7-8
85
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
