7.1.2 Pre-troubleshooting check list
Environment
1. Check if the machine is installed on a solid, LEVE
2. Check if the machine is exposed to direct sunlight
3. Check if the power supply plug inserted in the prod
4. Check if the power supply voltage within ± 10 volt
Media
1
1. Check if the media is supported within specificatio
Ch
k if th
2. Ensure that the paper size in the printer driver sett
application settings you use.
3. Check if the media is curled, folded.
Component
1. Check if the toner cartridges and imaging units are
2. Check if the Fuser unit and cartridge transfer unit a
3. Check if the front cover and side cover are closed
Service Manual
di i
t d ithi
7. Troubles
shooting
ELED surface.
.
duct and directly to the wall outlet.
ts of the specified power source.
ifi
ti
ons.
tings matches the paper selection in the software
e installed correctly.
are installed correctly.
.
7-
-2
SAMSUNG ELECTRONICS