Samsung CLX-9252 Series Service Manual page 192

3.23.2 Regi Bracket Assembly and Se
Perform the following procedure to remove the Regi Bra
1. Open the Side Cover[A]. 1 Open the Side Cover[A]
2. Unplug connector after removing 2 screws and Harn
3. Remove the Regi Bracket Assembly after removing
Service Manual
3. Replacemen nt Procedures
ensors
acket Assembly and Sensors from the printer.
ness cover [B].
3 screws.
[B]
3-7 79
SAMSUNG ELECTRONICS