Table of Contents
Advertisement
4.6.8. System Recovery
• Service Functions > System Recovery
This function repairs or formats the HDD of the syst
saved in a USB memory, and that USB memory need
Note – For more information, refer to chapter 9. Sys
4.6.9. User Data Management
• Service Functions > User Data Management
This function backup or restore user data stored in t
backup user data before format of the hard disk and
hard disk format will be performed when the data en
Note – To use this function users need to prepare a
4.6.10. Cool Down Mode
• Service Functions > Cool Down Mode
To avoid the side overheat of the fuser unit, the ma
fuser unit is overheated, machine stops and execute
stabilization process time.
Select time. (Default : 70 seconds)
OFF : Stabilization process is not executed.
30 seconds : Stabilization process is executed for 30
50 seconds : Stabilization process is executed for 50
70 seconds : Stabilization process is executed for 70
Note
Note – If the default value is changed, it affects the
If the default value is changed it affects the
Service Manual
4.Servic
ce Mode
tem. To use this function, a HDD image need to be
ds to be plugged in the system before the execution.
stem Recovery.
the hard disk. The purpose of this function is to
d store back to the hard disk after format. Note that
ncryption option is enabled by administrators.
USB hard disk that its size is larger than 100GB.
chine checks the fuser status. When the side of the
es the stabilization process. This function adjusts the
0 seconds.
0 seconds.
0 seconds.
life of fuser unit.
life of fuser unit
4-5
54
SAMSUNG ELECTRONICS
Advertisement
Table of Contents
