Toshiba G3 Workbook page 27

Additional Programming
Drooping Control Amount determines how fast the output frequency (and torque) changes as the 'RR'
input is changed. Increase the value in this parameter for faster response.
You may want to program one of the monitors (i.e. Status Monitor #1 Display Select in the UTILITY
PARAMETERS group) to be "RR Input Value" (setting value 14) so that you can see what is being
applied to the 'RR' input.
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-
KEYSTROKE
LOCAL/REMOTE
READ/WRITE
READ/WRITE hold down
LOCAL/REMOTE
down arrow
down arrow
READ/WRITE
up arrow until
READ/WRITE
up arrow until
READ/WRITE
PRG
Cycle power to the drive after programming
RESULTING DISPLAY
OUTPUT FREQUENCY
OUTPUT FREQUENCY
OUTPUT FREQUENCY
RAMF
RAM
EEP
0380
03AF
05
45
03AF alternating with 45, then 03AF
OUTPUT FREQUENCY
2192
0.0 Hz
0.0 Hz
0.0 Hz
0.0 Hz
27