Re-Commissioning After A Standstill Period; Setting The Lifting Speed - Bosch Rexroth HQ 5/H Assembly Instructions Manual

Please note:
• Mount the corresponding
WT workpiece pallet
before confi guring the
lifting speed (operating
load).
• Try to confi gure the HQ to
lift evenly and smoothly.

Throttle the supply
air evenly using both
throttles to adjust the
speed of the lifting
movement.
• Rotate in the "+" direction
The movement is slower.
• Rotate in the "–" direction
The movement is faster.

8.3 Re-commissioning after a standstill period

Follow the steps outlined for the initial start-up.

8.4 Setting the lifting speed

Sudden movements
Risk of serious injury or death.

Final commissioning may only be performed with protective devices in place.
These must be provided and installed by the customer.
X
Fig. 20: Setting the lifting speed (example shown here on HQ 5/XH)
WARNING
–
+
3 842 558 544/2017-07, MIT: HQ 5/H, HQ 5/XH, Bosch Rexroth AG
Start-up 37/60
Y
557 617-21