30/60
Assembly
Please note:
• Connect the pneumatics
at X and Y. This charges
the system more quickly
and evenly (better
synchronization).
• The pneumatic hoses at all
4 ports must be the same
length!
Connect the lift
transverse unit to the
compressed air supply.
Bosch Rexroth AG, MIT: HQ 5/H, HQ 5/XH, 3 842 558 544/2017-07
7.5.11
Connecting the product to the pneumatic system
High pneumatic pressure!
Risk of serious injury or death.
Switch off the compressed air supply to the relevant system component before
installing, removing or connecting the product to the pneumatic system.
Secure the system against being unintentionally switched on again.
• For the compressed air and operating pressure specifi cations, see page 53.
X
Fig. 15:
Pneumatic connection (example shown here on HQ 5/XH)
WARNING
Y
557 617-15