Huawei USG6000E Series Hardware Manual page 571

HUAWEI USG6000E Series
Hardware Guide
Use a Phillips screwdriver to fix the mounting ears to both sides of the chassis
with M4 screws. For details about how to install the mounting ears, see the
installation methods in
Figure 5-38 Installation of front and rear mounting ears
Step 2 Install floating nuts and cabinet guide rails.
1.
2.
Issue 08 (2022-04-20)
Figure
Determine the positions for installing the guide rails and floating nuts, as
shown in Figure 5-39.
NO TICE
Install the two guide rails at the same height to ensure that the device is
level.
Figure 5-39 Positions of floating nuts
Install the floating nuts that match M6 screws at the positions marked in
Figure 5-39. Figure 5-40
Copyright © Huawei Technologies Co., Ltd.
5-38.
illustrates how to install a floating nut.
5 Hardware Installation
564